• thehatfox@lemmy.world
    link
    fedilink
    English
    arrow-up
    52
    ·
    edit-2
    1 year ago

    This is the danger in building a smart home with proprietary, cloud based based platforms. The users have no control over the platform, and and it can be pulled from under your feet at any moment.

    To avoid this, it’s better to choose an open, cloud free home automation platform such as Home Assistant. It’s open source and can’t be shut down or remotely disabled, and works with smart devices from almost any vendor, meaning you aren’t locked into a single ecosystem. There is even an active Lemmy community at !homeassistant@lemmy.world to get advice and inspiration.

    • wewbull@feddit.uk
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      A lot of the time you’re still utilising those proprietary products though. I’m not aware of a home thermostat that isn’t both easy to use (for the family) and non-proprietry. Sure home assistant can act as a coordinator, but in a lot of the cases it’s doing it via the cloud service.

      • GreatAlbatross@feddit.ukM
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        Most modern boilers can be activated by a simple relay (it’s how the thermostat calls for heat).

        A basic switch plumbed into hass can be set up as a thermostat entity, that isn’t too horrible to use.
        And you can add a physical thermostat capable of sending values locally to hass if people want to be able to spin a dial on the wall.

        To be honest, I do a lot of my automation invisibly: The target temperature is automated, the only physical button is a “30 minutes heat” one I installed.

      • rmuk@feddit.uk
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        It’d not an off-the shelf solution as such, but I have a relay with an ESP32 that fires up the heating and it’s directly controlled by HA. HA uses thermometers around the house - mostly ZigBee - to work out when to run it.

        Given that Hive is ZigBee based and will continue to work locally, I wonder if it can be directly linked to HA?