#To repeat, new pinned thread:

Thread 47

As @clothes on lemmy.world pointed out: for some reason, via lemmy.world, this 46B thread is still pinned and there’s no sign of 47.

This is the finest FAQ in the fediverse. I come back to it, just to appreciate just how much data you fit in it, so easily accessible and concise for the experienced and inexperienced alike. It makes up for so many poorly written, ugly, inhuman FAQs across the years.

What about it!? @FelixSchlang tweet from 3:03 PM - Jun 29, 2023:

It happened!!!

SpaceX opened the wall to the inventory tent and revealed one of the water deluge plates to us up close and countless other things in there!

High res pictures for supporters on all platforms coming soon!

The image alone.

In a reply, they said it looks to be upside down.

In The Other Place, u/warp99 wrote,

Looks like the segments are around 400mm thick and constructed from 40mm (38mm=1.5"?) steel plate The overall shape is a hexagon about 10m across the flats with each corner notched out.

They also speculated on how to weld the edges together: maybe put them on a stand above the final location, weld them from above and below, attach cranes and remove the stand, lower into place.

Starship Gazer (as seen on Nitter) had more pictures.

Starbase live-

9:15am cdt- 11 more loads of rebar have been lifted over to the OLM since midnight. LR11000 still holding the deluge pipe in position to be welded.

Edit-

10:48am- Deluge pipe is moved to the side of the underground pipe bunker and laid down on the ground.

11:50am- 8 more bundles of rebar have been lifted over to the OLM. Some presumably extra bent pieces have been lifted away as well.

1:11pm- Deluge pipe raised again and moved back to join the pipe that goes underground.

5:00pm- Since noon there has been 15 more loads of rebar craned over to the OLM. Most loads appear to be multiple pieces but there are several large bent pieces that have been moved one at a time.

9:00pm- 10 more loads of rebar have been moved over. (44 for the day so far and 56 in the last 40 hours)

Yooooo

Road closure is now scheduled for tomorrow!

Exciting stuff happening right now (See Starbase Live).

• Launch site movement with the SPMT that transported the steel plate for the water deluge system and the SPMT with the Jig!
• Jig is being moved into position and now a crane is being raised! Things are getting exciting this morning.
• At the same time S28 is getting a payload door.

edit: And here’s the latest RGV Flyover video, which is the flyover from last week. Interesting content, but already heavily out of date.

I was summoned out of my Christmas lair for an update. I see the cladding was already mentioned.

Starbase live- Yellow crane to the left of OLM has been lifting rebar over to the pit most of the day.

(I missed part of the morning but I’ve counted at least 12 loads so far)

Rover 2-

20:43 cdt- The large deluge pipe that we saw test fitted last night has now been painted white and is lifted back over to where the pipes go underground by the tanks.

More pour info, this time from tweets from Zack Golden @CSI_Starbase. The truck counts basically match those from @LettuceTurnipTheBeet@lemm.ee’s post earlier.

SpaceX has received their final load of concrete for today’s Orbital Launch Mount foundation work. Here are the totals after the 15.3 hour marathon:

June 25th - 132 Truck loads

July 3rd - 171 Truck loads

Total Volume = 2,302 m^3 = 3030 yd^3

Total Weight = 5,411 Tons

For reference, a Fully loaded Starship ~ 5,000 Tons

Note: There were 4 additional trucks that showed up but were turned back around without offloading.

Shoutout to agents @VickiCocks15 and @SpmtTracker for keeping track of all these.

4:11 PM · Jul 3, 2023

and

Obviously this number is significantly greater than we predicted. For those who asked, that previous number was not considering the area in yellow, which were also completed today. This area is technically outside of the true foundation of the OLM

with a picture by RGV Aerial Photography.

SpaceX @SpaceX on Twitter

Ship 25 completes a six-engine static fire test at Starbase in Texas

11 seconds. In the audio, only a little bit of HONK at the end.

Someone pointed out that the flames start out as a triangle, but then switch rotated 60 degrees when the vacuum engines start - V to ^.

A comment in The Other Place mentioned that it looks like a little spalled concrete at 4 seconds in.

In a later tweet, Musk called it a “Key milestone completed for flight 2”.

I’m leaving reddit permanently, so thanks for maintaining this!

Looks like the Ship Quick-Disconnect is back!

Unrolled tweet thread at threadreaderapp.com by Ryan Hansen Space @RyanHansenSpace. It’s a look at the details of the steel plate parts and assembly under the Orbital Launch Mount.

Ship 25 completed a flight-like chill and spin of the Raptor engine pumps, stopping just before engine ignition. As a result of the test, cryogenic liquid oxygen formed a visible cloud beneath the ship. This checked out vital systems in advance of the upcoming static fire.

source

This is great thank you, I started following spacex Reddit in the echologic (was that his name?) Days, but the sub got a bit, I dunno, it started to lack a certain something. Just got too big maybe.

I’m happy to see this here! Thanks for starting it, sorry for the off topic 😂

So the big news of the day and night was what is believed to be the center plate of the water deluge system. It is thought that it will be placed directly under the Orbital Launch Mount.

@LettuceTurnipTheBeet@lemm.ee already posted (at top level) “CSI Starbase video on new Deluge system”, a deep dive part 1. The URL I see for the post is https://lemmy.world/post/879748 , because that’s how I access this. The canonical one is https://lemm.ee/post/530280 .

CSI Starbase SPMT Tracker @SpmtTracker posted a tweet with a picture of what is very likely to be a vertical stand for the center plate. The image is on Imgur. The tweet is here. Ryan Hansen Space @RyanHansenSpace tweeted a rendering of how it might look under the OLM. This should be the image:

@LettuceTurnipTheBeet@lemm.ee posted below (if sorted by new) a link to a 13-minute video by Starship Gazer, of people working in the tent on the center plate. https://lemm.ee/comment/534238 . Someone commented that, from 4 minutes on, it’s comedy gold. People were grinning around them. I’m told that someone is standing on top of the cheater pipe at one point.

NASASpaceflight posted a video of the rollout of the center. It’s about 1 hour 26 minutes long. The stand / jig was on the first truck; the center plate with some people on it was on the next truck. The clearest views are about 17 minutes on.