For those who have pre-ordered it is already here, the rest have to wait a little longer. Starfield is finally here! Have you bought it, why or why not? If you’ve already played it, what do you think of it? We are very curious!

Discuss all things Starfield below!

  • tal@kbin.social
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    my monitor freaks out if I raise the hz higher than 100 so can’t tell how high it’ll go

    Try a shorter monitor cable? I had a really long cable that did not deal well with high refresh rates.

    • CordanWraith@aussie.zone
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Thank you! Unfortunately I’ve tried multiple cables with different lengths, as well as DP and HDMI, different GPU’s and different OS’s, iGPU vs discrete, the only common failure is the monitor. Unfortunately it’s happening on both of them, same model of monitor and seems to be a common flaw. They are about 6 years old now though

      • TechAdmin@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        For old monitors breaking or acting weird a lot of times it’s capacitors going bad & popping. I love looking around at the insides of tech things that stopped working right to try seeing why & maybe fixing them so just curious what could be causing it :)

    • obscura_max@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Might also need to check what the ports on your monitor support. A high quality DisplayPort cable will probably solve the issue, but make check the spec on the HDMI and DisplayPorts on your monitor to make sure they can support higher the higher bandwidth needed for high refresh rate/high resolution monitors. If your HDMI is only v1.4, but DP is 1.2 or 1.4, definitely use DisplayPort instead.

      If you just used an old cable that came with something for free, I would buy a proper cable that supports the newer DP or HDMI specs from someone like KableDirekt.

      • CordanWraith@aussie.zone
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Thank you for the advice!

        Unfortunately I’ve tried a number of very expensive cables, as well as multiple graphics cards. The monitors used to be fine, but over time they started getting all these horizontal lines across the screen if I go above 100hz. I’ve also tried Mac and Windows and same problem with both.

        I’ve looked it up though and seems to be a common problem for AOC Agon monitors, so my fault for cheaping out, even though they still cost me $550aud per monitor :(