Learned a lot, not completely satisfied with the turnout, but I’ll have more ammo for the next build.

Nice!Nano V2 using ZMK firmware, BLE, and custom PCB made with ergogen, kicad, and purchased thru JLPCB. Going to print a case and learn the keyboard layout.

  • -V0lD@programming.dev
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    As someone from outside the ergonomic keyboard community that just came across this via /everything; I’ve always wondered how you work around the missing keys in a keyboard like this. Say, you want to type the name “Emmy”. What key combination do you press for that, seeing as the e, m and y are missing

    • dnzm@feddit.nl
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      The layout looks Colemak-ish, so I’d expect the E to be the key labeled 5 on the right half.

      Smaller keyboards like this use layers to reuse certain keys, rather than adding more. The idea is to minimize finger/hand/arm movement. Things like choosing a more efficient layout (QWERTY is actuality pretty bad in that regard), using home row mods (so the letter keys under your index fingers double as Shift when held, for example), and so on.

      It takes some getting used to, but it actually quickly becomes second nature.

        • neonred@lemmy.world
          link
          fedilink
          arrow-up
          7
          ·
          edit-2
          1 year ago

          After getting used to the mental effort is similar to pressing Shift or Ctrl but you get to keep the physical comfort and the reduced travel.

          Additionally you are able to press any key without looking or moving and repositioning your hand, be it symbols, numbers, fn-keys, all of them.

        • dnzm@feddit.nl
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          It’s a different kind of effort, one that doesn’t give you RSI or at least improves your situation. And as explained, that mental effort is temporary, it gets engrained in your muscle memory quite quick.

    • apfel@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Not sure what layout OP is going for, but the Miryoku layout features lots of the usual ways people go to fit a full keymap (and more) into such small keebs :)

  • neonred@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    Congratulations! Was it difficult to do? What are those keycaps and which keyboard layout is this?

    • dnzm@feddit.nl
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      I’m kinda curious about those caps, as well! The layout looks Colemak-ish, is it far off?

      • neonred@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        1 year ago

        I suspect the homerow is still ARST… so I wonder.

        Colemak has two columns on the digit finger, this layout here however seems to have two columns on the pinkie finger, putting more stess to them?

        Or are the keys shifted so the homerow here is VARS, but that doesn’t seem to make sense as the Colemak layout has been designed with the most common keys at the homerow… also the staggering would be weird then.

        Any insights here?

        • Tefinite Dev@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          This was a fatal flaw that I didn’t realize until I had ordered the PCB. You’re right, the pinky has two columns, which isn’t as bad as you’d expect.

          I still home row on asrt, which I’m really starting to enjoy. I need homing nubs on the keys and I tend to miss click on the top pinky

    • Tefinite Dev@lemmy.worldOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Well, I had intended to have my pinkies rest on the outside of the board for a traditional keyboard feel, but I screwed up and my indexes are now on the inner columns.

      You also don’t have a real feel for spread or stagger until you put it all together.

      I tried regular key caps but they’re too big, and if you’re looking for a modified key layout most key cap sets are saddled and curved.

      So, that being said, low profile switches and key caps is the way to go. It also helps to know the difference between mx, kahli, and gateron keys

      • apfel@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        For getting that feeling folks often recommend printing out the layout and testing how comfortable it feels on paper (of course not gping to be 100% accurate but i’ve heard it helps a lot)

  • FlatFootFox@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    This keyboard looks great! I love the keycaps you went with here. There’s always something you can tweak next time, but this looks like a really nice first board!