Hello! I own a 08 Acura TL that has an oil leak from a bad valve cover gasket. I took it to my mechanic for some other things, but also wanted a quote for a replacement. The number they gave me was too high for my liking, and I did some research and decided to attempt the replacement myself. The shop would’ve done a spark plug replacement as well, so I also plan to do that. My issue is I have never done work on a car, not even an oil change. In total so far, I need 2 sets of valve cover gaskets, spark plugs, an intake plenum gasket, and maybe an air filter boot (since I’ve heard they have a tendency to crack, if anyone has a good source please let me know). What other parts should I preventatively replace, and what are the normal steps to working on the top of the engine?

  • ido@lemmy.worldOP
    link
    fedilink
    arrow-up
    1
    ·
    8 months ago

    I’m interested in this manifold spacer, do you have any more info on that? What would checking the clearances entail?

    • vivavideri@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      8 months ago

      Feeler gauge tool, wrench/screwdriver, and a cheat sheet of what position your crankshaft is in for each valve. You turn it a little to open/shut the valves so they’re in the right spot to check the clearance.