Regarding the 2017 comment: I was at work and read that quote “nobody knew healthcare could be so complicated” and I laughed hard for a while. Then sighed. Then I had to go for a walk. Deep down I had really doubted someone could get that far in life and be as dumb as he appeared to be. That statement shredded that thought. He wasn’t acting. He was really that dumb, and the next three years were going to be rough.

Within the Democratic party, there’s debate about how to handle climate change. There are people who advocate for slow, cautious changes and still see fossil fuels having a small role to play in the future. There are others within the Democratic party that want more drastic action, and make a huge government spending program to try to rapidly move the US energy to renewables (even naming it after one of the biggest US government programs made during the depression). That’s normal politics. And it’s all within the Democratic party.

The GOP mostly deny climate change exists. A few GOP members suggest that climate change is happening, but is a natural event not caused by man.

The recent house drama from the speakership battle was caused because 10 nutjobs didn’t want to fund any social programs and wouldn’t approve the budget. Most GOP compromised and made a TEMPORARY budget proposal that the Democratic reps would vote for. This caused the hardliners to remove the speaker. Because he had the audacity to compromise on a TEMPORARY budget.

Removing policy aside and just looking at behavior, many GOP members do not believe in compromising to get things done. There’s attempts to not hold elected officials accountable (unless they are from the other party). It’s very little cooperation and more retaliation.

A single GOP senator didn’t like that the US military would reimburse a servicemember’s travel for medical care if they lived in a state where some reproductive treatments weren’t available. This one senator has single-handedly denied 360 military promotions and nominations to military positions. The Senate has historically tried to make it where being the minority party still had some power, so the rules let this happen (the other GOP senators on this committee weren’t blocking, just the one guy).

The Democratic senators became so fed up they decided to change the rules to prevent a single committee member from blocking promotions. While most GOP senators publicly condemn this guy, many said this rule change was too much. So it looks like the rule change vote will be along party lines, although the #1 GOP senator has said it might be necessary to vote through to get the military back on track.

The last GOP senator really known for being reasonable and wanting to work collaboratively (McCain) died. He was respected by both parties until Trump came along, and now the GOP don’t really hold his legacy in high regard.

Sorry, a lot longer than I intended, but it’s a pattern showing no desire to try to govern effectively. Putting all issues of policy aside, I think it’s a bad idea to vote for the GOP.

The business strategy decisions behind CPU fab is really interesting over the past 15 years.

AMD made a budget clone of Intel two decades ago. Then Intel made a misstep and released Northwood Pentium 4. AMD used less power and was faster. And AMD decided to go with DDR memory, while Intel went RDRAM. Then AMD was king when they went AMDx86-64 for 64 bit and Intel went Itanium.

Then AMD made a huge miscalculation on the future of multicore computing and designed Bulldozer, while Intel got their shit together and went down the hyperthreading route and released CORE/Core2/Core2Duo chips. And Intel was king for a decade.

I don’t know the exact timing, but AMD needed cash and sold their fabs to raise money, which became TSMC. TSMC learned how to make stuff small since smartphones became a huge market. Then AMD let an engineer run the company and she invested in the Zen architecture, which could be made by TSMC with their lessons from the mobile world.

This is my take. By AMD turning TSMC loose, TSMC could date other people work on mobile projects, which helped them learn.

It’s a side note now, but Intel hung on to their fabs and lagged behind TSMC. AMD let their fab go and benefitted from it.

As a side note, Intel did try fairly hard to get into mobile like TSMC. They had the Atom chips and went for tablet, Ultrabook, netbook, and mobile. I had an ASUS Android phone with an Intel SOC. So it’s not like they ignored mobile, but it didn’t benefit them as much as TSMC.

I don’t think NY splits electoral votes. To get any NY electoral votes, he’d have to carry the whole state.

Will this leave him off the ballot for the primary? He is expected to win the primary and this will pump the numbers for another GOP candidate. If enough states do this, it could give the convention the cover to select someone else.

I love MPFC, but some of the sketches are “meh”. For every “Battle of Pearl Harbor”, there’s a “Confuse-a-cat”.

Fawlty Towers is great. Mildly racist against the Spanish and Irish.

It takes 4 episodes to really build into the complexity. Then season 2 turns it on its head.

Red Dwarf is pretty good. Fawlty Towers is great. Someone recommended “Yes Minister” and the first season is awesome. The Hallmark of great comedy writing is if it holds up, and Yes Minister still is hilarious 40 years later.

Dark is a German Netflix show. It unfolds into something akin to “Lost” over the first four episodes. The ending doesn’t suck, and they set up the end to where it’s almost impossible to get it right. It’s not an amazing ending, but it’s impressive that they managed to make it not terrible, since it builds up to a near-impossible ending.

Squid Game is pretty great but gory. Letterkenny and Trailer Park Boys are quirky comedies with some rough language throughout.

The typical cause of this is a biomarker sticks to one side of an embryo, marking it as left (or right, I don’t remember), but a twin embryo that is too close will see that marker on the other side and develop mirror imaged to the first embryo, right?

Look at Sovol or Anycubic in that price range. I don’t have direct experience with either. A good friend of mine had two Anycubics at one point last year and he said they were easier than his Creality.

My third printer, I paid $70 for, used (ender 3 pro return). It was missing several small components, one big part (top aluminum extrusion) that required some machining with a drill press, and had a bad thermistor.

I don’t think you can get a beginning printer for $100 unfortunately. Sovol and Anycubic make printers among the cheapest that are more beginner friendly (I think) than Ender, for roughly the same price. I have a friend with a Creality and an Anycubic Vyper, and the Vyper seems to be more beginner-friendly. I have two Crealitys and I love them, but both required a ton of modifications to become reliable.

Can you check your area for a local maker space? My local library has 3D printers for anyone under 18. Universities typically have a few of different technologies (SLS, SLA, FDM)

There are methodical ways of valuating a private (and public) company. Some are pessimistic and some are wildly optimistic. Your can legally use whichever one you want, only you must only use that valuation method for everything. It’s illegal to value the company low for taxes and high for loan collateral. And if you sell it, you can owe back taxes if your valuation was off (sale price is the new valuation).

This is overly-simplified US accounting rules (from finance class 10 years ago)

He took it private so, although there can be shares, they aren’t traded on the open market. So no positions to short.

Minors can’t sign a contract. Their parents have to sign for them. Maybe that’s related?

If you have a filament runout sensor, the klipper default settings aren’t great. If the sensor activates, the printer shuts down after about an hour, losing your home position. With a part on the bed, you can’t re-home, so it’s a wasted print.

The mesh leveling isn’t automatic either. You might want to add either auto-load your default mesh leveling if you always use the same print surface, or put mesh leveling codes in the starting G-code section of your slicer.

I ran the pressure advance tuning and found that I needed a ton of pressure advance. My prints turned out much better.

I also got improvements by reducing the allowable deviation in the slicer (G-code files get much bigger, though), and I load files as STEP files directly in Prusaslicer. STL doesn’t have curves, it’s a series of planes. STEP files have geometric primitives and can have curves.

I also would like to know. My Moto G 5G suddenly lost fingerprint reader (as in, it’s not even an option in settings anymore) and I think I need to reflash it.

“Also I asked the prosecutor what they considered ‘sex’ during this trial and it technically didn’t include oral or digital sex and I’m an attorney and thought I’d weasel my way out of this on a technicality even though when the news leaked, it turns out almost everyone considers oral sex to be sex.”

Out of curiosity, have you watched the Simpsons recently? I think, after season 31 or 32, it started getting better again. There are some really great episodes from two seasons ago.

The latest season of Futurama had two good episodes, but the rest were kind of weak. About the same level as season 9-10(Hulu season numbering). Those seasons were “meh” mostly but with three really amazing episodes (Free Will Hunting, Game of Tones, Meanwhile).

I watched Futurama trying to stay sane in grad school, as it was released on DVD. It’s straight-up comforting to watch now. Watching it when I’m stressed connects me emotionally to almost 20 years ago. I was stressed then but I made it out ok.

Seriously? I was looking at a Surface product recently, and it appeared to have an access panel for the NVME drive. I read a ton of complaints about the dimensions of the drive being unusual, but access to it was easy. I don’t think I was looking at a Surface pro though.

If a surface pro wants to be a full OS and not a tablet OS, it should be easy to replace the storage device.

Ah ok. That’s probably true. I was under the impression that a polymer that is solid at room temperature is a plastic.

A politician and a political party has two domains they operate in: policy and governance. Policy is where a politician stands on issues, and typically where almost all of the campaigning happens. Where does this politician stand on healthcare, gun control, environment, etc.

But governance is as important, both for the individual and for the political party. For the politician: can they build consensus? Can they prevent alienating their constituents. Can they set goals that are big, but achievable. And for the political party, governance is how well they develop their members. Identifying who fits best in each elected position. How to help members gain experience for other offices. How to identify up-and-coming politicians.

The GOP is currently experiencing a failure of governance. The HOR is unable to operate because the GOP can’t effectively govern. And time is ticking on one of the core HOR duties: approving the budget. The GOP is not getting high quality people into the correct positions, and has too many obstinate people in place to govern.