Headsup! Orders for first batch close tonight at midnight (CDT)

(4c) DIY kits are now open for orders on compression keyboards!

I have been designing and fine tuning the (4c) since late 2022, and am excited to share this product with the world. This first batch will be an extremely limited run.

Orders will be shipped out beginning in just 3 weeks from today 7/25/23.

Note: if you are purchasing the (4c) PCB kit, please check out our wiki for information on building a (4c) and uploading a custom layout! There is also a build guide video that takes you through all the soldering and assembly directions of the (4c) and its accompanying case.

With regards to cases, you can also purchase a 3D printed (4c) case from compression keyboards and they will ship out alongside the PCB kits. In addition, if you have your own 3D printer you can print your own case by heading to the wiki for files and more information.

The wiki with details on part selection, building, design files, and compiling firmware is here: https://compressionkeyboards.com/blogs/wiki

travel case has become magnetic, its almost the footprint of a phone. Magnetic wrist rest accessory anyone?

Thanks to everyone on the subreddit (now lemmy community!) that encouraged me to pursue making these real! I’m so happy to be giving back to the community and making these designs available to everyone on Github.

  • bastrah@kbin.social
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    That’s a really interesting case design too! Cool to see that you’re taking into account that one might bring it into the office or so and needs a “travel” case as well.

    • xpsking@midwest.socialOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Thanks! The travel case came from that exact need for myself. It packs up so well now that I don’t leave the house without it.

      My hope is that with the design files released could see other keyboards with similar case designs! As well as others using the magnets embedded into the case for other accessories like wrist rests.

  • Luftruessel@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    That does look really nice and it might just be exactly what I want. I’ll throw a few questions in here that came to my mind. (Would be my first build, so I do not know too much):

    • could I get away with one display to see the battery life of both? Or is it just displayed on the connected device? Don’t really know what else I would use it for
    • is there a print sample to figure out if the size is right?
    • it is really only for these kailh choc switches, right? I can’t use others? I mostly find v2 of those.
    • xpsking@midwest.socialOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      1 year ago
      • for the main half (by default the right board) battery is reported both to the OS and on the display, the other half only shows battery on the screen. The left half lasts longer that the right. So recharging both sides when your computer reports battery is low will ensure you always have charge.
      • print out this dxf
      • just choc v1s for now, in the future I am hoping to make a mx version.

      The group buy ends tonight at midnight (central time) btw! This first batch is very limited but future batches will run longer.

  • Holyginz@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    This might be a dumb question, but does this kit come with everything needed to get it working? Obviously assembly is required I’m just trying to figure out if I would need to also purchase other things to get it working out of the box.

    • zankem@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      1 year ago

      I don’t think it does since it just states it comes with just the boards and links the wiki to get the parts.

      If it does then I’ve got a whole bunch of extras coming my way which I guess I could use for a Corne build in the future if so ._.

    • xpsking@midwest.socialOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Not a dumb question! Just the pcbs and cases are being sold. The cases come with screws, magnets, etc to put them together but for the pcb there is a part selection guide on the wiki with all required non-included parts.

      • Holyginz@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Gotcha. I have been wanting to try this style of keyboard but the expense for a good one has been hard to justify when I don’t even know how I would like the setup. This seems a lot more reasonable than several hundred bucks lol.

        • zankem@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          edit-2
          1 year ago

          Well, you can also get a corne choc PCB kit for around the same price if you take into account the parts to assemble. Add the cost of the additional parts to make the whole board and it still in the hundreds for either kit. A cheap alternative kit which is similar is a piantor by beekeeb.